Additional information
Repeat Measurement | |
---|---|
Size | |
COLLECTIONS | |
Colour | Colour 1 Dark Grey, Colour 2 Light Grey, Colour 6 Gold, Colour 8 Cream, Colour 9 Berry |
Pattern Match |
AU$20.00 – AU$461.00
MY WALLPAPER PRODUCT
Toll Coated Non-Woven Digital Print Wallpaper
PATTERN REPEAT (VERTICAL): 133 cm or 1330 mm (Height)
ROLL SIZE: 70 cm wide x 10 m
PATTERN MATCH: Straight match
LEAD TIME: 14 days once order is received and paid for. ( This estimate doesn’t include freight time)
Repeat Measurement | |
---|---|
Size | |
COLLECTIONS | |
Colour | Colour 1 Dark Grey, Colour 2 Light Grey, Colour 6 Gold, Colour 8 Cream, Colour 9 Berry |
Pattern Match |
MY PRODUCT
Toll Coated Non-Woven Digital Print Wallpaper
What makes Non-Wovens different from paper
My wallpaper is printed in 10 m rolls.
70 cm wide & comes fully trimmed.
$4610 AUS per 10 m roll
NON-WOVEN WALL-COVERING HANGING INSTRUCTIONS
We advise that a professional be used when hanging non-woven wallpaper. The instructions can be found below:
Preparation:
Walls should be dry, clean, and even.
Remove any old wallpaper and loose paint.
Roughen painted surfaces with sandpaper.
For best results, walls should be cross lined using a good quality lining paper. Sizing the lining paper will aid adhesion. Lining should be allowed to dry out completely before hanging the wall covering.
PASTING AND HANGING YOUR NON-WOVEN WALL COVERINGS
This is a paste the wall product. The decorator should paste the wall and not the back of the wall covering.
A good quality, solvent free, fungicide protected ready-mixed ‘tub’ adhesive – specifically for paste the wall non-woven papers should be used.
Paste should be evenly applied to the wall to hang one length at a time, to an area slightly wider than width of the paper.
Butt joints and use a decorator’s brush to smooth down the wall covering, working from the centre to the edges to express air bubbles.
Avoid squeezing paste out of the joints and ensure paste does not get onto the brush or roller. No paste should be allowed to come into contact with the surface and hands should be kept clean and dry whilst hanging the wall covering.
Paste will damage the surface. The company cannot accept responsibility for marks or damage caused by paste.
Should any paste have been allowed to come into contact with the surface, it should be lightly sponged whilst still moist, using a clean damp sponge.
Our coated non-woven wallpapers and vinyls are all “spongaeble”. Uncoated papers and specials such
as our rage of natural wall coverings should be cleaned by dusting with a clean dry brush or by
brush accessory on a vacuum cleaner.
SUITABILITY IN AREAS OF MOISTURE
Whilst our wallpapers are suited to most environments, applications in bathrooms and kitchens may
influence your choice of base paper. We recommend our vinyls and coated papers for such situations.
Another option is to apply a wallpaper varnish such as POLYVINE decorators' varnish.
It is important to test before application as it may affect colours.
ABOUT THESE INSTRUCTIONS
This information has been supplied in good faith, but without guarantee. Site conditions are beyond
our control. It is the responsibility of the buyer to ensure that the environment is
suitably prepared.
10 - 15 working days plus freight time.
We can easily match wallpaper colours to any paint chip, swatch or colour sample you provide us. Colours are matched by eye and we need to physically see the colour we're matching. We send you a sample of the colour to check and confirm before ordering.
MY PRODUCT
Toll Coated Non-Woven Digital Print Wallpaper
What makes Non-Wovens different from paper
My wallpaper is printed in 10 m rolls.
70 cm wide & comes fully trimmed.
$4610 AUS per 10 m roll
NON-WOVEN WALL-COVERING HANGING INSTRUCTIONS
We advise that a professional be used when hanging non-woven wallpaper. The instructions can be found below:
Preparation:
Walls should be dry, clean, and even.
Remove any old wallpaper and loose paint.
Roughen painted surfaces with sandpaper.
For best results, walls should be cross lined using a good quality lining paper. Sizing the lining paper will aid adhesion. Lining should be allowed to dry out completely before hanging the wall covering.
PASTING AND HANGING YOUR NON-WOVEN WALL COVERINGS
This is a paste the wall product. The decorator should paste the wall and not the back of the wall covering.
A good quality, solvent free, fungicide protected ready-mixed ‘tub’ adhesive – specifically for paste the wall non-woven papers should be used.
Paste should be evenly applied to the wall to hang one length at a time, to an area slightly wider than width of the paper.
Butt joints and use a decorator’s brush to smooth down the wall covering, working from the centre to the edges to express air bubbles.
Avoid squeezing paste out of the joints and ensure paste does not get onto the brush or roller. No paste should be allowed to come into contact with the surface and hands should be kept clean and dry whilst hanging the wall covering.
Paste will damage the surface. The company cannot accept responsibility for marks or damage caused by paste.
Should any paste have been allowed to come into contact with the surface, it should be lightly sponged whilst still moist, using a clean damp sponge.
Our coated non-woven wallpapers and vinyls are all “spongaeble”. Uncoated papers and specials such
as our rage of natural wall coverings should be cleaned by dusting with a clean dry brush or by
brush accessory on a vacuum cleaner.
SUITABILITY IN AREAS OF MOISTURE
Whilst our wallpapers are suited to most environments, applications in bathrooms and kitchens may
influence your choice of base paper. We recommend our vinyls and coated papers for such situations.
Another option is to apply a wallpaper varnish such as POLYVINE decorators' varnish.
It is important to test before application as it may affect colours.
ABOUT THESE INSTRUCTIONS
This information has been supplied in good faith, but without guarantee. Site conditions are beyond
our control. It is the responsibility of the buyer to ensure that the environment is
suitably prepared.
10 - 15 working days plus freight time.
We can easily match wallpaper colours to any paint chip, swatch or colour sample you provide us. Colours are matched by eye and we need to physically see the colour we're matching. We send you a sample of the colour to check and confirm before ordering.